Dry Link Disconnect
The utlimate Dry Disconnect designed for critical applications where any spillage must be avoided. Patented valve design gives a remarkably lightweight, low maintenance unit while a mechanical interlock prevetns accidental openings. With very low pressure drop, ideal for fluid transfer where the prevention of spillage is all important.
Drip-free design
- Minimizes exposure to fluids in the line
- Eliminates costly clean-ups
- Offers greater protection for workers and the environment
No spills
- Identical disc halves securely seal flow in the line
- Mechanical interlock prevents accidental opening
- Disc must be sealed and closed before coupler and adaptor can be separated
Better flow
- Fewer internal components create a better flow rate
- Smooth bore, simple configuration of Dry Link assembly results in lowest pressure drop available
- Ideal for higher viscosity fluids
Easy operation and maintenance
- UP to 50% lighter than comparable dry disconnect units
- Coupler has built-in swivel which eases alignment
- Parts are accessible for easy maintenance
Operation movies
- 1" Dry Link operation (3mb)
- 2" Dry Link operation (3mb)
Simple connection and operation
Product Guidance Chart
Dry Link Couplings are available in a variety of standard and
special features as shown below.
| Type | Size |
Body Material |
Main Seal Material |
End Connection |
Special Features |
|
Coupler (Style 250) |
1” (DIN 25) | SS 316 | TFE | NPT (female) | Sanitary with 20 RA polished internals |
| 1.5” (DIN 40) | Alloy 20 | Viton | BSP (female) | FDA approved seals | |
| 2” (DIN 50) | Hastelloy C | EPDM | Butt-weld | Keyed Couplings | |
| 3” (DIN 75) | Chemraz | Flanged (ANSI Class 150) | As specified by the customer | ||
| 4” (DIN 100) | Triclover |
|
Adapter (Style 260) |
1” (DIN 25) | SS 316 | TFE | NPT (female) | Sanitary with 20 RA polished internals |
| 1.5” (DIN 40) | Alloy 20 | Viton | BSP (female) | FDA approved seals | |
| 2” (DIN 50) | Hastelloy C | EPDM | Butt-weld | Keyed Couplings | |
| 3” (DIN 75) | Chemraz | Flanged (ANSI Class 150) | Safety Pressure Cap with backup seal | ||
| 4” (DIN 100) | Triclover | Staging accessory for vertical loading | |||
| As specified by the customer |
Click here for more technical information
For more information, contact your local INRUMEC branch.
